![background image](http://html1.mh-extra.com/html/minn-kota/riptide-ulterra-112/riptide-ulterra-112_owners-manual_1802797026.webp)
26 | minnkotamotors.com
©2016 Johnson Outdoors Marine Electronics, Inc.
CHANGE THE PROP ORIENTATION
6
7
h. Once in the proper orientation, lower the Trim
Housing and Shaft onto the Steering Housing.
i. Let the Trim Release Handle move back in place.
Trim Housing
Trim Housing
Trim Release
Handle
Trim Release
Handle
Steering Housing
Shaft
j. Reconnect the Power Cables to the battery and
make sure the breaker, if equipped, is turned “on”.
Turn the motor “on”.
k. Stow the motor using the Stow/Deploy Button
on the Foot Pedal or using the i-Pilot or i-Pilot
Link remote to check the orientation of the Prop.
Power Cables
6h
6i
7j
WARNING
When stowing or deploying the motor, keep fingers clear of
all hinges, pivot points and all moving parts. When stowing
and deploying the motor, ensure that it doesn’t contact the
boat, trailer, or any other obstruction.
7k
Summary of Contents for RIPTIDE ULTERRA 112
