minnkotamotors.com | 31
©2016 Johnson Outdoors Marine Electronics, Inc.
MANUALLY STOWING THE RIPTIDE ULTERRA
b. Using a #2 Phillips Screwdriver, loosen the screw
on the Manual Tilt Knob.
c. The Manual Tilt Knob holds two Metal Plates
together. Using a Flat Blade Screwdriver pry up
on the Manual Tilt Knob until it releases from the
Metal Plates.
2
2b
2c
Manual Tilt
Knob
Manual Tilt
Knob
Metal Plates
Screw
3
4
d. Locate the Trim Release Handle on the Side of
the Trim Housing. Grasp the Trim Release Handle
and pull it out.
e. While holding the Trim Release Handle out, grasp
the Trim Housing and Shaft and lift them up off
the Steering Housing.
f. Lift up on the Trim Housing until Shaft and Trim
Housing can be pulled up by hand.
WARNING
When using the Trim Handle or moving the Trim Housing,
keep fingers clear of all hinges, pivot points and all
moving parts above and below the Trim Housing.
Trim Housing
Trim Housing
Trim Release
Handle
Trim Release
Handle
Steering Housing
Shaft
Steering Housing
Power Connection
WARNING
When lifting the Trim Housing off the Steering Housing,
power connections are exposed. Keep fingers and metal
objects clear of exposed connections. The power from
the connection is removed after 10 seconds once the
connection is exposed.
Summary of Contents for RIPTIDE ULTERRA 112
