![background image](http://html1.mh-extra.com/html/minn-kota/riptide-ulterra-112/riptide-ulterra-112_owners-manual_1802797032.webp)
32 | minnkotamotors.com
©2016 Johnson Outdoors Marine Electronics, Inc.
MANUALLY STOWING THE RIPTIDE ULTERRA
5
6
g. While the Trim Housing and Shaft are lifted up,
release the Latch Pin Bracket.
h. Lift the Trim Housing, Shaft and Lower Unit up,
and rotate it.
i. Pull the Lower Unit onto the Mount Ramps.
j. Secure the Lower Unit onto the Mount Ramps
using the Emergency Strap that was provided
with the motor. The D-ring on the Emergency
Strap can be hooked into the Base Extrusion
below the sideplate that was removed.
k. With the D-ring secured, wrap the Emergency
Strap around the Lower Unit and secure it to
itself. The Emergency Strap should be pulled tight
enough that the Lower Unit rests securely on the
Mount Ramps.
Trim Housing
Trim Housing
Trim Release
Handle
Steering Housing
Mount Ramps
Mount Ramp
Base Extrusion
D-ring
Emergency Strap
Lower Unit
Mount Ramps
Lower Unit
Latch Pin Bracket
Latch Pin
Shaft
5g
5h
5i
Summary of Contents for RIPTIDE ULTERRA 112
