Minebea CSD-903-EX, Instruction Manual

Page: 31 / 226

15
3. Operation
3-1. Changeover of mode
This unit has various modes according to the operating situation.
Change the mode by the key operation.
When the load cell output exceeds ±10 % of weighing capacity in the condition that power-on-zero is
valid after checking the display, the display becomes the error indication of [
‐‐‐‐‐‐
]. At this time, if
the key is pressed, the display compulsorily becomes a load display. Refer to the paragraph [6-8.
Power on zero].
Set mode 2
④
Refer to the Function mode
⑤
Refer to the SQ Function mode
⑥ Refer to the setting mode of
weighing comparative value
Display of
Display of
Display of
Power ON
Display check
(All light on)
Display of
Mesurement mode
(Display measuring value)
Stand-by condition
(Light off the measuring value
di l )
Set mode 1
① Refer to the C function mode
②
Refer to the Calibration mode
＋
③ Refer to the Check mode
Display of
Display of
⑦
Refer to the Accumulation
display mode
Display of