Minebea CSD-903-EX, Instruction Manual

Page: 194 / 226

178
At abnormal operation
Return (CSD-903
→ Host)
2 4 6 8
@ 0 0 E R 2 0
Terminator
2 4 6 8
@ 0 0 E R 2 1
Terminator
・
The command that registers mV/V of five digits below the decimal point for ZERO (No.09) and SPAN
(No.12) aiming at the performance gain of the calibration is added since ROM Ver. 2.300.
When you use the command that newly registers mV/V of ZERO and SPAN, please use the command
that registers mV/V of five digits below the decimal point for ZERO (No.9) and SPAN (No.12)
・
When this instrument is built into the system that has already used mV/V of four digits below the
decimal point for ZERO (No.08) and SPAN (No.11), you can use the command as it is.
Please note the mistake of the set digit number when changing to the command of five digits below
the decimal point by registering mV/V of ZERO (No.9) and SPAN (No.12).
(8) Span stable check (Host
→
CSD-903)
2 4 6 8 10 12 14 16
@ 0 0 9 0 0 6
Terminator
Stable
Return (CSD-903
→
Host)
2 4 6 8 10 12 14 16
@ 0 0 9 0 0 6 1
Terminator
Unstable
Return (CSD-903
→
Host)
2 4 6 8 10 12 14 16
@ 0 0 9 0 0 6 0
Terminator
Address
00 to 31
Address
00 to 31
Address
00 to 31
Command No.
Number
Address
00 to 31
Command No.
Number
Address
00 to 31
Command No.
Number