Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 25 / 94

5 Getting started
5.1 Safety instructions
WARNING
Warning of a hazard area.
It is essential that the safety instructions in Chapter 2 of the PR 5900 Installation
manual are read before installation and commissioning!
5.2 Switching on the device
The device can be set up as follows:
- Via keys on the front of the device
- Via an external PC keyboard
- Via a notebook/PC using the VNC software (included on the CD)
When the device is powered up, the following is shown on the display and/or notebook/
PC:
Checking…
Booting…
Restoring…
The device is booting up.
PR 5900 - The instrument type is displayed, PR 5900
- BIOS version
- Firmware version
- Automatic display test
- Weight display
No signal Error message: no load cells are connected, see also
PR 5900 operating instructions.
No values from scale Error message: no communication with the xBPI scale,
see also PR 5900 operating instructions.
Error message: unable to read weight values from the
ADU (analog-digital converter); see also PR 5900 opera-
ting instructions.
Scale not ready Error message: no load cells or scale connected, see also
PR 5900 operating instructions.
5 Getting started Phase PR 5900/81
Minebea Intec EN-23