Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 46 / 94

5.4.9 Overview Weighing Points
In this menu item, you can conigure the overview of weighing points in the visualization.
Configuration @admin
Inputs
Outputs
Modbus-TCP master
Limits
Parameters
Production lines
Local control
Overview weighing points
View weighing point
Simulation
Print
Overview weighing points @admin
Overview weighing points
Status weighing point
1st line
2nd line
3rd line
4th line
5th line
6th line
enabled
active
WP status material
Recipe
Difference
Production line
Actual
Blank line
Default Save
[Overview weighing points]
If [enabled] was selected, the overview is also included in the visualization.
[Status WP]
If [in use] was selected, a maximum of 6 lines can be displayed.
WP status material is displayed in line 1.
Possible selection for line 2…6:
Production line, Recipe name, target value, actual value, diference (between target
value and actual value), Gross, Blank line.
1. Select and conirm [Overview weighing points] using the cursor.
A selection window appears.
2. Select and conirm the individual settings.
Phase PR 5900/81 5 Getting started
EN-44 Minebea Intec