Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 23 / 94

— Local operation
— Local start Deactivated, recipe, plan
— Plan (if selected) Start entire plan, start line of plan
— Local stop Check the ☑ box to perform the "Stop" function
during production on the device under [Recipe]
or [Plan].
— Local abort Check the ☑ box to perform the "Abort"
function during production on the device under
[Recipe] or [Plan].
— Customer [Local start] - [Recipe] selected: Not used, input
at start, permanent entry (max. 20 characters)
[Local start] - [Recipe] selected: Not used,
display
— Order [Local start] - [Recipe] selected: Not used, input
at start, permanent entry (max. 20 characters)
[Local start] - [Recipe] selected: Not used,
display
— Production ID [Local start] - [Recipe] selected: Not used, input
at start, permanent entry (max. 20 characters)
[Local start] - [Recipe] selected: Not used,
display
— Recipe cycles [Local start] - [Recipe] selected: Not used, input
at start, permanent entry (1…9999)
[Local start] - [Recipe] selected: Not used,
display
— Default Settings are reset to factory settings.
— Save The settings are saved.
— Overview of weighing points The contents are represented in the form of an
overview.
— Overview of weighing points Incorporate the overview into the visualization.
Deactivated, activated
— Status of weighing point Not active, active
— 1st line Display only: WP status material
— 2nd to 6th line [Status WP] - [active] selected: Possible
selection: Production line, recipename, recipe
line, target value, actual value, diference
(between target value and actual value), gross,
blank line
[Status WP] - [not active] selected: Possible
selection: Blank line
— Default Settings are reset to factory settings.
4.1.7 Local operation
Coniguration
Local operation
4.1.8 Overview of weighing points
Coniguration
Overview of weighing points
4 Setting up the application menu Phase PR 5900/81
Minebea Intec EN-21