Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 21 / 94

— inputs See Chapter 4.1.1 .
— Outputs See Chapter 4.1.2 .
— ModBus-TCP master See Chapter 4.1.3 .
— Limit values See Chapter 4.1.4 .
— Parameters See Chapter 4.1.5
— Production lines Load (refresh) the production lines created and
conigured in P, see Chapter 4.1.6 .
— Local operation See Chapter 4.1.7 .
— Overview of weighing points The contents are represented in the form of an
overview, see Chapter 4.1.8 .
— Weighing Point View Incorporate the view into the visualization, see
Chapter 4.1.9 .
— Simulation see Chapter 4.1.10
— Printing Print coniguration, see Chapter 4.1.11 .
— Inputs Function assignment for installed input cards.
— Option
Selection: Option
‑
1, Option
‑
2, Internal, remote
terminal if necessary
— Type Display only
— Outputs Function assignment for installed output cards.
— Option
Selection: Option
‑
1, Option
‑
2, Internal, remote
terminal if necessary
— Type Display only
— ModBus-TCP master
— Communication error Selection: Cancel, Show message
— ModBus-TCP module Selection: Phoenix 1…8
— Activate module
4 Setting up the application menu
- Visualization
Display of weighing point overview, weight values and the parameters set under
[Coniguration] - […].
4.1 Coniguration
Coniguration
4.1.1 Inputs
Coniguration
Inputs
4.1.2 Outputs
Coniguration
Outputs
4.1.3 ModBus-TCP master
Coniguration
ModBus-TCP master
4 Setting up the application menu Phase PR 5900/81
Minebea Intec EN-19