Coding for option 1 and option 2
Terminal strip:
Insert the coding pin into the slot in the position marked in gray in the
image.
Terminal:
Remove (nip of) the relevant coding nib.
Note:
Refer to Chapter
for further information on terminal coding.
Example:
Connection for PR 5500/12: Relay control (power output)
①
Inductive load for free-wheel diode
②
Grounding terminal or screen clamping rail
③
U
DC
= 24 V 0.5 A power supply unit
The relay switches when the output is active (true).
To protect the output circuit, relays must be equipped with free-wheel diodes.
Process Controller Maxxis 4 PR 5500
4 Device installation
EN-66
Minebea Intec
