Mindray PM-50, Operation Manual

Page: 45 / 60

Pulse Oximeter Management System
39
It displays the value of the measured SpO
2
and PR as well as the
corresponding Index No and Save Time of each measurement.
The content in the Information Area can’t be directly inputted or
changed. Please select <Patient Information> under the <Setup> menu,
or click the shortcut icon.
Note
The data displayed as “---” is invalid.
The "(ADD)" appearing beside the check record number is to
indicate that the data thereafter are additional ones to this ID.
7.3 Functions
Before operate the function hereinafter, please first connect the Pulse
Oximeter with your PC (Refer to 3.4 Connect Computer ), and then
double click the shortcut icon on the desktop to run the PMS software.
7.3.1 Data Output
PMS software can output the data stored in the Pulse Oximeter into the
hard disk of your PC.
1. Select <Data Output> under the <Operation> menu to start data
outputting as shown in Figure 7-6. During outputting, you can click
exit to cancel the operation.
Figure 7-6 Data Outputting