Mindray PM-50, Operation Manual

Page: 19 / 60

Installation
13
3.3 Power-on
Press the Power button to turn on the Pulse Oximeter. The startup
interfaces and version information will be displayed, and then the
initialization interface as shown in Figure 3-3. After that, the Pulse
Oximeter will automatically switch to the standby mode as shown in
Figure 3-4.
Figure 3-3 Startup interface 3 Figure 3-4 Standby interface
3.4 Connect SpO
2
Sensor
As the Figure 3-5 shows, you can connect the SpO
2
sensor to the Pulse
Oximeter by simply inserting the sensor’s connector to the
dual-purpose socket.
Figure 3-5 Connect SpO
2
sensor