Mindray PM-50, Operation Manual

Page: 23 / 60

Measurement
17
Warning
Prolonged and continuous monitoring may increase the risk of
burns at the site of the sensor. If you have to use the Pulse
Oximeter for Prolonged and continuous monitoring, it is especially
important to check the sensor placement, and ensure proper
attachment on neonates and patients of poor perfusion or skin
sensitive to light. Check the sensor location every 2~3 hours and
move to another location if the skin deteriorates.
Make sure no contamination or scar exists in the site where the
sensor is placed. Otherwise, the measured result may be incorrect
because the signal received by the sensor is affected.
When used on different patients, the Pulse Oximeter is prone to
crossed contamination, which should be prevented and controlled
by the user. Disinfection is recommended before using the SpO
2
sensor on other patients.