Mindray PM-50, Operation Manual

Page: 40 / 60

Pulse Oximeter Management System
34
and then click “Next” in the next dialog box.
4. Input the correct serial number, and click “Next” to resume.
5. Select the serial port to connect the Pulse Oximeter with your PC,
and click “Next” to resume.
6. Choose the destination folder where the PMS software is to be
installed.
7. Click “Next” and “Finish” according to the prompt.
8. After the installation is completed, a new shortcut icon will appear
in the desktop of your computer as shown below.
9. Double click the icon to run the PMS software.
7.1.2 Uninstall
To uninstall the PMS software, please follow the steps:
1. Click “Start-Setting-Control Panel”, and double click the icon for
“Add/Remove Programs” to open the “Add/Remove Programs”
dialogue box.
2. Select the “Pulse Oximeter Management System”, and click the
“Change/Remove” button. Then following the prompt to uninstall
the PMS software.
Note
The steps above are provided as examples only. They maybe a bit
different from your operation if you use other operation system.