FWD ACC
The FWD ACC setting determines the time the motor takes to
ramp to either a higher speed in the forward direction or a
lower speed in the reverse direction, within the limits of
available torque. The FWD ACC setting is factory set for its
fastest forward acceleration time.
Turn the FWD ACC trimpot CW to increase the forward
acceleration time, and CCW to decrease the forward
acceleration time.
REV ACC
The REV ACC setting determines the time the motor takes to
ramp to either a higher speed in the reverse direction or a
lower speed in the forward direction, within the limits of
available torque. The REV ACC setting is factory set for its
fastest reverse acceleration time.
Turn the REV ACC trimpot CW to increase the reverse
acceleration time, and CCW to decrease the reverse
acceleration time.
31
Calibration
Summary of Contents for RG300 Series
