manualshive.com logo in svg

MIMAKI TextileJet Tx2-1600 Series, Operation Manual

The MIMAKI TextileJet Tx2-1600 Series is a cutting-edge textile printer designed for high-quality printing on various fabrics. Ensure optimal performance by referring to the Operation Manual, which you can download for free from manualshive.com. Get detailed instructions and troubleshooting tips to maximize the potential of your printer.

Share
Download
background image

- 2.11 -

Cleaning the wiper shaft

The dirty wiper shaft may cause the wiper malfunction and resulting an error display.

Cleaning penetrated ink

When printing is made on a thin cloth, the ditch for penetrated ink may be stained by penetrated ink.

In this case, clean the ditch with water.

Maintenance for frame components

If the frame components of the device have stained, dampen a piece of soft cloth with water or

neutral detergent diluted with water, squeeze it and wipe the frame components clean.

Summary of Contents for TextileJet Tx2-1600 Series



























































































































































Reviews:

No comments

Related manuals for TextileJet Tx2-1600 Series

Brands by name

Popular brands

Load more brands