MIMAKI TextileJet Tx2-1600 Series, Operation Manual

Page: 108 / 154

- 3.20 -
Setting up auto-cleaning function [AUTO clean]
Set up the auto-cleaning function. Printing failures may be remarkable on dusty locations or loca-
tions with low temperature. Perform cleaning for each plot to prevent printing failures.
ON : The head is cleaned automatically.
OFF : The head is not cleaned automatically.
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display gives
the indication [AUTO CLEAN].
4. Push the [ENTER] key.
5. Set a [AUTO CLEAN] by pushing the JOG keys
[ ] and [ ].
Here, select [ON].
6. Push the [ENTER] key.
7. Push the [END] key twice, and the menu re-
turns to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
MEDIA COMP.
< ent >
TYPE.1
AUTO CLEAN
< ent >
TYPE.1
AUTO CLEAN
: OFF
TYPE.1
AUTO CLEAN
: ON
TYPE.1
AUTO CLEAN
< ent >
<< LOCAL >>
width : 1272mm