MIMAKI TextileJet Tx2-1600 Series, Operation Manual

Page: 83 / 154

- 2.7 -
Interrupting the printing operation
To interrupt the printing operation that has been started, stop the carriage and erase (the receive data)
from the device.
STEP
1. Push the [REMOTE] key to stop the printing
operation.
2. If data is being transmitted from the computer
to the device, stop the data transmission.
3. Push the [DATE CLEAR] key.
The data that has been received is erased.
4. Push the [ENTER] key.
The device enters the LOCAL mode.
After completing the printing operation
The operation to be performed by the operator at the end of the printing operation (switching off the
power) is explained below.
STEP
1. Put the device back into the LOCAL mode.
Push the [REMOTE] key and put the device back into the
LOCAL mode.
2. Turn off the power to the device.
(See page 1.25)
<< LOCAL >>
width : 1272mm
DATE CLEAR
< ENT >
<< LOCAL >>
width : 1272mm
<< LOCAL >>
width : 1272mm