MIMAKI JV33-130 Page 96 Operation Manual Download

Page: 96 / 202

3-32

Setting the deodorize fan

The fan operates during printing, and operates according to the set of [STOP TIME] from the completion of
printing.

Upon the setting of the deodrize fan, two items are settable as follows.

•

STOP TIME

: Setting the time from the completion of printing until the fan operation is interrupted.

•

RENEW

: The fan operation is executable even not in printing if it is set to “ON”.

Press the

key in the local

mode.

Select [MACHINE SETUP] by pressing
the

keys.

Press the

key twice.

Select the item to be set by pressing the

keys.

STOP TIME

: Setting the time from the completion of printing until the exhaust fan is

stopped.

RENEW

: Select this to operate the fan.

Press the

key.

Select the set value by pressing the

keys.

STOP TIME

: 0 - 240 seconds or continuous running

RENEW

: Select “ON” to operate and “OFF” to stop the operation.

Press the

key.

Press the

key several times to end.

• The deodrize fan is an option included in the drying ventilation unit.
• When a drier fan is equipped, the drier fan operates in linkage with the contents set here.

F UNC T I ON
S E T U P

< E N T >

F UNC T I ON

MACH I NE S E T UP

< EN T >

D EODOR I Z E F A N
S T OP T I ME

< e n t >

Summary of Contents for JV33-130











































































































































































































Search results

Summary of Contents for JV33-130

Reviews:

Related manuals for JV33-130

Brands by name

Popular brands

MIMAKI JV33-130, Operation Manual

Search results

Summary of Contents for JV33-130

Reviews:

Related manuals for JV33-130

Brands by name

Popular brands