MIMAKI JV33-130 Page 160 Operation Manual Download

Page: 160 / 202

Other maintenance functions

4-46

Changing the ink

Ink type or the color used can be changed.

• To change the ink set such as changing from “4-color model“ to “6-color model”” or “8-color

model”, the machine must be worked by our service engineer. Contact our service office or
the distributor in your region.

Change the ink type

Change the ink color

To change the ink type used such as changing from
ES3 ink to SS21 ink, work as follows.

To change the ink color used such as changing from “6-
colors” to “6- white” of SS21 ink, work as fol-
lows.

•

Note for changing ink type

Changeable ink type is limited by the type of ink used. See the table on the right.

•

Note for changing ink color

To replace white ink of SS21 from “SS21W” to “SS21W-2”, follow the exhibit “Before using
new White Ink (SS21-W2)” (D201848).

•

When washing, use a special cleaning solution cartridge (sold separately).

Wash with the proper cleaning solution cartridge for the used ink type.

“Discharge” the remaining ink in
the machine, and “Wash” the head
or the tube.

See P.4-19 "DISCHARGE & WASH".

Fill ink.

See P.4-21 "Initial ink fill up".

Ink type to be changed

PIG

Sublimation

dye ink

SS21/ES3

Ink type used

PIG

Changeable

Contact our service office or the distributor in your

region.

Sublimation

dye ink

SS21ES3

Not changeable

Changeable

(However, when you wish to change to silver ink or white

ink of ES3, the work by our service staff is required.)

Ink Type

Cleaning Solution Type

Solvent ink

MILD SOLVENT Cleaning Solution Cartridge (SPC-0294)

Aqueous pigment ink

Aqueous cleaning solution cartridge (SPC-0259)

Sublimation dye ink

Summary of Contents for JV33-130











































































































































































































Search results

Summary of Contents for JV33-130

Reviews:

Related manuals for JV33-130

Brands by name

Popular brands

MIMAKI JV33-130, Operation Manual

Search results

Summary of Contents for JV33-130

Reviews:

Related manuals for JV33-130

Brands by name

Popular brands