MIMAKI JV33-130 Page 19 Operation Manual Download

Page: 19 / 202

Moving this machine

1-3

Before Use

Moving this machine

Move this machine according to the following steps when this machine is required to move on the step-free
same floor.

Release the lock of caster.

Move this machine as shown in the fig-
ure.

• For safety, be sure to work it with more than 2 per-

sons.

• Do not push the cover to move this machine since

the cover may be broken.

Lock the caster.

• When this machine is to be moved to any place other than on the same step-free floor, contact

your distributor or a sales office of MIMAKI.
If you move it by yourself, failure or damage may occur.
Be sure to request your distributor or a sales office of MIMAKI to move this machine.

• When moving this machine, take care not to give a significant impact on it.
• Be sure to lock the caster after moving of this machine.

Summary of Contents for JV33-130











































































































































































































Search results

Summary of Contents for JV33-130

Reviews:

Related manuals for JV33-130

Brands by name

Popular brands

MIMAKI JV33-130, Operation Manual

Search results

Summary of Contents for JV33-130

Reviews:

Related manuals for JV33-130

Brands by name

Popular brands