manualshive.com logo in svg

MIMAKI JV33-130, Operation Manual, Page: 164 / 202

Share
Download
MIMAKI JV33-130 Operation Manual Download Page 164

5-2

Troubleshooting

Take appropriate actions as described below before taking the trouble as a failure.
If still the problem is not solved after troubleshooting, contact your dealer or an office of MIMAKI.

Power does not turn on

In most cases, this is due to improper connection of the power cable for the machine or computer. Check 
that the power cable is connected properly.

The machine does not start printing

This occurs when the data is not being transmitted to the machine properly.
It can also occur when the printing function does not work properly or the media is not set correctly.

Has the power cable been connected 
between the machine and a power plug 
socket ?

Securely connect the power cable.

Is the main switch ON ?

Turn on the main switch. (

P.2-4)

Is the power switch located on the front 
of machine "ON" ?

Turn on the power switch on the front of 
the machine.

Is the correct interface cable used ?

Use the cable exclusive for the device.

Is the interface cable properly con-
nected ?

Securely connect the interface cable.

Yes

Is the message on the display indicat-
ing that ink has run out ?

Replace the ink cartridge with a new one.

No

No

No

No

No

Yes

Summary of Contents for JV33-130











































































































































































































Reviews:

No comments