4-37
Other maintenance functions
4
Routine Maintenance
White Ink Maintenance Function
If SS21 white ink is left unused for a while, the color may become uneven by clogging of the nozzle or set-
tling of pigment.
If the color does not improved by the head cleaning (
P.2-24), use this maintenance function. (This func-
tion is valid when the firmware Ver.4.10 or later is installed and SS21 white ink is filled.)
White ink maintenance function has three levels of maintenance.
Select the maintenance level depending on the condition.
1
Select [WHITE MAINTE.] of the maintenance menu.
(1)
Press the
key in the local mode.
(2)
Select [MAINTENANCE] by pressing the
keys then press the
key.
(3)
Select [WHITE MAINTE.] by pressing the
keys.
2
Press the
key.
3
Select the maintenance level by press-
ing the
key.
•
Set value
: LEVEL1 to LEVEL3
• This describes the operation when LEVEL3 is set.
4
Press the
key.
LEVEL1
Performs maintenance in the following order:
(1)
Performs the automatic nozzle cleaning function.
*1
(2)
Performs cleaning.
*2
*1. The operation is the same as the CUSTODY WASH of ST. MAINTENANCE. (Leaving time: three minutes)
*2. The operation equivalent of “Hard cleaning” of the head cleaning is performed on each color. (
P.2-24).
LEVEL2
Performs maintenance in the following order:
(1)
Performs the automatic nozzle cleaning function.
*1
(2)
Fills the white ink.
(3)
Performs cleaning.
*2
LEVEL3
Performs maintenance in the following order:
(1)
Performs the automatic nozzle cleaning function.*1
(2)
Discharges the white ink remaining in the head or in the tube.
(3)
Fills the white ink.
(4)
Performs cleaning.*2
• According to the level changing from 1 to 3, the amount of consumption becomes more. Use
Level 2 and 3 when the status is not improved even if you perform Level 1 maintenance.
• When the machine is left unused for a long time, it is recommended to perform LEVEL1 of this
function about every other week.
• The other cautions of this function or the white ink are included in the pack of the cartridge.
Read it carefully before use.
WH I T E MA I N T E .
S E L E C T
: L E V E L
1
WH I T E MA I N T E .
S E L E C T
: L E V E L
3
S H A K E WH I T E I N K
C A R T R I DGE S
:
e
n t
Summary of Contents for JV33-130
