MIMAKI JV33-130, Operation Manual

Page: 129 / 202

Maintaining Capping station
4-15
4
Routine Maintenance
5
Press the key.
6
Press the key to fill the cap
with the cleaning solution.
• The cleaning solution is applied by drops when
the is pressed.
• When the is pressed again, drops stop.
• Repeat the drops several times to fill the cap with
the cleaning solution just before the solution over-
flows from the cap.
7
Close the front cover and press the
key.
8
Set the duration for leaving the clean-
ing solution by pressing the
keys.
• Set value : 1 to 99 minutes (Unit: minute)
9
Press the key.
• Perform the nozzle cleaning.
• On completion of the nozzle cleaning, the head
moves to above the platen.
10
Open the front cover.
11
Press the key to fill the cap with the cleaning solution.
• The cleaning solution is applied to the cap by drops when the is pressed.
• When the is pressed again, drops stop.
• During the idle absorbing is interrupted, repeat the drops several times to fill the cap with
the cleaning solution just before the solution overflows from the cap.
12
Close the front cover and press the
key.
• It returns to the local mode after the initial opera-
tion.
F i l l t h e l i q u i d
COMP L E T E D ( N E X T ) : e n t
S T . MA I N T E N A NC E
L E A V I NG T I ME : 1 m i n
S T . MA I N T E N A NC E
L E A V I NG T I ME : 2 m i n
* B e i n g I n i t i a l i z e d *
P L E A S E WA I T
* B e i n g I n i t i a l i z e d *
P L E A S E WA I T
< L OC A L . 1 >