manualshive.com logo in svg

MIMAKI JF-1610, Operation Manual

Share
Download
MIMAKI JF-1610 Operation Manual Download Page 8

vii

Foreword

Congratulations on your purchase of a MIMAKI "JF-1631/1610" model of UV ink jet printer.
UV Inkjet Printer JF-1631/1610 uses ultraviolet ray curing ink (UV ink).
Read this Operation Manual carefully and make the most effective use of your printer.
Before starting to operate the printer, be sure to read this Operation Manual carefully .

On this operation manual

• This Operation Manual describes the operation and maintenance of Model JF-1631/1610 Color Ink Jet

Printer (hereinafter referred to as the device).

• Please read and fully understand this Operation Manual before putting the machine into service. It is

also necessary to keep this Operation Manual on hand.

• Make arrangements to deliver this Operation Manual to the person in charge of the operation of this

device.

• This Operation Manual has been carefully prepared for your easy understanding, however, please do

not hesitate to contact a distributor in your district or our office if you have any inquiry.

• Description contained in this Operation Manual are subject to change without notice for improvement.
• In the case where this Operation Manual should be illegible due to destruction or lost by fire or

breakage, purchase another copy of the Operation Manual from our office.

Reproduction of this manual is strictly prohibited.

All Rights Reserved. Copyright © 2006 MIMAKI ENGINEERING CO., LTD.

　

Summary of Contents for JF-1610















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands