MIMAKI JF-1610, Operation Manual

Page: 45 / 142

2-13
Drawing an image from source data
2
Basic Operations
Interruption of drawing
To interrupt the drawing, stop the drawing operation and erase the received data from the device.
1
Press the key while drawing.
• Drawing operation stops.
• When data is transmitted from the computer, the computer stops transmission of data.
2
Press the key.
3
Press the key.
• Received data is erased and the device returns to
the local mode.
Move the Y-bar
When you wish to check the drawing results etc., you can move the Y-bar.
Set the evacuation position (view position) of the Y-bar in advance.
Setting the view position
1
Press the key in the local
mode.
2
Press the key.
3
Press the key.
4
Press the key.
< L OC A L >
2 . 5 mm
REMOTE
D A T A C L E A R
< E N T >
DATACLEAR
* * D A T A C L E A R * *
ENTER
F UNC T I ON
V I EW
< E N T >
FUNCTION
V I EW
S T A R T
< e n t >
ENTER
V I EW
S E T V I EW POS
< e n t >
V I EW
POS I T I ON
: * * * * MM
ENTER