MIMAKI JF-1610, Operation Manual

Page: 31 / 142

1-13
1
Before Use
Menu mode
This device has three modes. Each mode is described below.
Local Mode
Local mode is a mode in drawing preparation state.
All keys are available.
Receiving of data from the computer is allowed, however, drawing is not executed.
The following operations are allowed in the local mode.
(1) Setting an origin and drawing area by pressing the JOG keys.
(2) Executing
“
Test drawing
”
by pressing the key.
(3) Executing “ head cleaning ” by pressing the key.
(4) Execute setting of each function by pressing the key.
Function Mode
Press the key during the Local Mode to call the Function Mode.
Function settings on drawing method can be set.
Remote Mode
Drawing is conducted according to received data.
Pressing of the
key causes the temporal stop of the device.
Press the during the Local Mode to start the Remote Mode.
The UV lamp is lit when it has not been ON.
TEST
CLEANING
FUNCTION
FUNCTION
REMOTE
REMOTE