MIMAKI CG-130FXII, Operation Manual

Page: 90 / 152

– 3.38 –
COPIES A( ), COPIES B( ) :
Setting Description
1 to 9999 Effective when one pattern is multi-printed at regular intervals.
Cut automatically as detecting the registration marks continuously based on the first data.
SPD LIMIT :
Setting Description
0 to 60 cm/s Set the speed limit when rapidly moving in performing continuous copy.
Depends on the sheet type in use, mark detect may not be performed correctly if using a slippery
sheet. In the case, set the speed limit. If not setting the speed limit, set the value to “0”.
When in use of a leaf sheet, the copy numbers
refers to the [COPIES A] value.
If the number of copies can specify on the
application software, like an attached FineCut,
specify the value to [1]