MIMAKI CG-130FXII, Operation Manual

Page: 82 / 152

– 3.30 –
Mark and printable, cuttable range
The TP1 starting line should be 20mm or more away from the sheet line.
When feeding out, certain types of sheet may get stuck.
The TP2 end line should be 30mm or more outside the sheet end line.
When feeding out, separation from the grit rollers may occur.
Mark Form : Type1
Mark Form : Type2
30mm and more (Cutting, Pen-plotting)
40mm and more (Half Cut, Pouncing)
A : Between 50 and 9000mm
A : Between 50 and 9000mm
20mm and more (Normal)
10mm and more (Expand)
B : 50mm and more
B : 50mm and more
Keep the marks away
from the Image.
Pinch roller
Effective cut area when
the expands is set to ON.
Effective cut area when
the expands is set to OFF.
Normal :
20mm + and more
Expand :
10mm + and more
Mark length
2
Mark length
2
Cutting, Pen-plotting:
30mm + and more
Half Cut, Pouncing:
40mm + and more
Mark length
2
Mark length
2
TP2
TP1
TP2
TP1