Milwaukee M18 FIW212, User Manual

Page: 12 / 36

12
English
12
TECHNICAL DATA M18 FIW212
No-load speed 0–900 min
-1
Impact range 0–1000 min
-1
Torque 0–102 Nm
No-load speed 0–1650 min -1
Impact range 0–2400 min -1
Torque 0–203 Nm
No-load speed 0–2400 min
-1
Impact range 0–3500 min
-1
Torque 0–339 Nm
No-load speed 0–1200 min -1
Impact range –
Torque 34 Nm
Max nut busting torque 339 Nm
Max diameter bolt/nut M18
Tool reception 1/2" (12.7 mm)
Battery voltage 18 V
Weight according EPTA-Procedure 01/2014 (2.0 – 12.0 Ah) 1.5 – 2.6 kg
Recommended ambient operating temperature -18 °C – +50 °C
Recommended battery types M18B, M18HB
Recommended charger M12-18, M1418C
Noise/Vibration information
Noise emission values determined according to EN 62841
Sound pressure level (Uncertainty K = 3 dB(A))
99.79 dB(A)
Sound power level (Uncertainty K = 3 dB(A)) 110.79 dB(A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 62841
Vibration emission value a
h
Impact tightening of fasteners of the maximum capacity of the tool 17.24 m/s
2
Uncertainty K 1.50 m/s
2
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for
di
ff erent applications, with di ff erent accessories or poorly maintained, the vibration and noise emission may di ff er. This may
signi fi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched o ff
or when it is running but not actually doing the job. This may signi fi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ff ects of vibration and/or noise, such as maintaining the tool
and the accessories, keeping the hands warm, organising work patterns.
WARNING! Read all safety warnings, instructions,
illustrations and speci fi cations provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
IMPACT SCREWDRIVER SAFETY WARNINGS
Hold the power tool by the insulated gripping surfaces,
when performing an operation where the fastener may
contact hidden wiring.
Fasteners contacting a “live” wire may
make exposed metal parts of the power tool “live” and could
give the operator an electric shock.
Wear ear protectors. Exposure to noise can cause hearing
loss.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the product. Use protective clothing, such as dust
mask, protective gloves, sturdy non-slip footwear, helmet, and
ear defenders.