Milwaukee FUEL SDS-MAX M18 FHM, Original Instructions Manual

Page: 16 / 100

14 14
English
GB
TECHNICAL DATA
Cordless Rotary Hammer M18 FHM
Production code 4696 96 02...
... 000001-999999
Frequency band 2402-2480 MHz
Radio-frequency power 1,8 dBm
Battery voltage 18 V
No-load speed 380 min -1
Rate of percussion under load max. 2900 min -1
Impact energy per stroke according to EPTA-Procedure 05/2009 11 J
Chuck neck diameter 66 mm
Drilling capacity in concrete 45 mm (SDS-max)
Tunnel bit in concrete, bricks and limestone 65 mm (SDS-max)
Core cutter in concrete, bricks and limestone 150 mm (SDS-max)
Weight according EPTA-Procedure 01/2014 (Li-lon 5,0 Ah ... 12,0 Ah)) 9,7 ... 10,4 kg
Recommended Ambient Operating Temperature -18 °C ... +50 °C
Recommended battery types M18B5 – M18HB12
Recommended charger M12-18...
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 96,5 dB (A)
Sound power level (Uncertainty K=3dB(A)) 107,5 dB (A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete
Vibration emission value a
h, HD
Uncertainty K=
9,4 m/s
2
1,5 m/s
2
Chiselling:
Vibration emission value a
h, Cheq
Uncertainty K=
9,4 m/s 2
1,5 m/s 2
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may
be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of control
can cause personal injury.
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give
the operator an electric shock.
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when working
with the machine. The use of protective clothing is recommended,
such as dust mask, protective gloves, sturdy non-slip footwear, helmet
and ear defenders.
The dust produced when using this tool may be harmful to health. Do
not inhale the dust. Use a dust absorption system and wear a suitable
dust protection mask. Remove deposited dust thoroughly, e.g. with a
vacuum cleaner.