20
21
DE 13 RP
PDE 16 RP
................................4152 88 03... .......................... 4152 94 03..
...000001-999999
...000001-999999
....................................630 W ........................................630 W
....................................315 W ........................................315 W
................................ 0-950 min
-1
............................... 0-950 min
-1
....................................520 min
-1
...................................520 min
-1
.........................................- .........................................7800 min
-1
......................................59 Nm........................................59 Nm
.........................................- .............................................16 mm
.........................................- .............................................20 mm
......................................13 mm .......................................13 mm
......................................40 mm .......................................40 mm
............................... 1,5-13 mm ................................ 1,5-13 mm
............................. 1/2"x20 .................................... 1/2"x20
......................................43 mm .......................................43 mm
.....................................2,1 kg ........................................2,0 kg
......................................84 dB (A) .................................100 dB (A)
......................................95 dB (A) .................................111 dB (A)
................................. < 2,5 m/s
2
.....................................1,8 m/s
2
.....................................1,5 m/s
2
.....................................1,5 m/s
2
.........................................- .............................................17 m/s
2
.........................................- ............................................1,5 m/s
2
ENGLISH
Always disconnect the plug from the socket before carrying out any work on the machine.
When working with large drill diameters, the auxiliary handle must be fastened in a right
angle with the main handle (see illustrations, section "Twisting the handle").
SPECIFIED CONDITIONS OF USE
DE 13 RP:
The drill can be used for drilling in wood, metal and plastics and for
screwdriving.
PDE 16 RP:
The electronic drill/screwdriver can be universally used for drilling,
percussion drilling, screwdriving and cutting screw threads.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the product described under
“Technical Data” ful
fi
lls all the relevant regulations and the directives 2011/65/EU (RoHS), 2014/30/
EU, 2006/42/EC, and the following harmonized standards have been used:
EN 62841-1:2015
EN 62841-2-1:2018+A11:2019
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN IEC 63000:2018
Winnenden, 2021-04-07
Alexander Krug
Managing Director
Authorized to compile the technical
fi
le
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
GB-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the product described
under “Technical Data” ful
fi
lls all the relevant provisions of the following Regulations S.I.
2008/1597 (as amended), S.I. 2016/1091 (as amended), S.I. 2012/3032 (as amended) and
that the following designated standards have been used:
BS EN 62841-1:2015
BS EN 62841-2-1:2018+A11:2019
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015
BS EN 61000-3-2:2014
BS EN 61000-3-3:2013
BS EN IEC 63000:2018
Winnenden, 2021-04-07
Alexander Krug
Managing Director
Authorized to compile the technical
fi
le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
MAINS CONNECTION
Appliances used at many di
ff
erent locations including wet room and open air must be
connected via a residual current device (FI, RCD, PRCD) of 30mA or less.
Connect only to single-phase AC current and only to the system voltage indicated on the
rating plate. It is also possible to connect to sockets without an earthing contact as the
design conforms to safety class II.
Make sure the machine is switched o
ff
before plugging in.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
If the machine is mainly used for percussion drilling, regularly remove collected dust from
the chuck. To remove the dust hold the machine with the chuck facing down vertically, and
completely open and close the chuck. The collected dust will fall from the chuck.
It is recommended to regularly use cleaner for the clamping jaws and the clamping jaw
borings.
If the supply cord of this appliance is damaged, it must only be replaced by a repair shop
appointed by the manufacturer, to avoid hazardous situations
Use only Milwaukee accessories and spare parts. Should components need to be replaced
which have not been described, please contact one of our Milwaukee service agents (see
our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the Article No. as well
as the machine type printed on the label and order the drawing at your local service agents
or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden,
Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before carrying out any work
on the machine.
Please read the instructions carefully before starting the machine.
Wear ear protectors!
Do not dispose electric tools, batteries/rechargeable batteries together with
household waste material.
Electric tools and batteries that have reached the end of their life must be
collected separately and returned to an environmentally compatible
recycling facility.
Check with your local authority or retailer for recycling advice and
collection point.
Class II tool.
Tool in which protection against electric shock does not rely on basic
insulation only, but in which additional safety precautions, such as double
insulation or reinforced insulation, are provided.
There being no provision for protective earthing or reliance upon
installation conditions.
n
0
No-load speed
V
Volts
AC Current
European Conformity Mark
British Confomity Mark
Regulatory Compliance Mark (RCM). Product meets applicable regulatory
requirements.
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH
TECHNICAL DATA
ROTARY DRILL / PERCUSSION DRILL
Production code ........................................................................................................................
Rated input .....................................................................................................................
Output .............................................................................................................................
No-load speed ................................................................................................................
Speed under load max. ..................................................................................................
Rate of percussion under load max ................................................................................
Static jamming moment*, 1st gear..................................................................................
Drilling capacity in concrete ............................................................................................
Drilling capacity in brick and tile .....................................................................................
Drilling capacity in steel ..................................................................................................
Drilling capacity in wood .................................................................................................
Drill opening range .........................................................................................................
Drive shank.....................................................................................................................
Chuck neck diameter ......................................................................................................
Weight according EPTA-Procedure 01/2014...........................................................................
* Measured according to Milwaukee norm N 877318
Noise information
Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) .............................................................
Sound power level (Uncertainty K=3dB(A)) .................................................................
Wear ear protectors!
Vibration information
Total vibration values (vector sum in the three axes) determined according to EN
62841.
Vibration emission value a
h
:
Drilling into metal ............................................................................................................
Uncertainty K ..................................................................................................................
Percussion drilling into concrete .....................................................................................
Uncertainty K ..................................................................................................................
WARNING Read all safety warnings, instructions, illustrations and
speci
fi
cations provided with this power tool.
Failure to follow all instructions listed below
may result in electric shock,
fi
re and/or serious injury.
Save all warnings and instructions for future reference.
DRILL / PERCUSSION DRILL SAFETY WARNINGS
Safety instructions for all operations
Hold the power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory or fasteners may contact hidden wiring.
Cutting accessory or fasteners contacting a “live” wire may make exposed metal parts of
the power tool “live” and could give the operator an electric shock.
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
Safety instructions when using long drill bits
Never operate at higher speed than the maximum speed rated of the drill bit.
At
higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the
workpiece, resulting the personal injury.
Always start drilling at low speed and with the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the
workpiece, resulting the personal injury.
Apply pressure only in direct line with the bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of control, resulting in personal injury.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when working with the machine.
The use of protective clothing is recommended, such as dust mask, protective gloves,
sturdy non-slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health. Do not inhale the dust.
Wear a suitable dust protection mask.
Do not machine any materials that present a danger to health (e.g. asbestos).
Switch the device o
ff
immediately if the insertion tool stalls! Do not switch the device on
again while the insertion tool is stalled, as doing so could trigger a sudden recoil with a high
reactive force. Determine why the insertion tool stalled and rectify this, paying heed to the
safety instructions.
The possible causes may be:
• it is tilted in the workpiece to be machined
• it has pierced through the material to be machined
• the power tool is overloaded
Do not reach into the machine while it is running.
The insertion tool may become hot during use.
WARNING!
Danger of burns
• when changing tools
• when setting the device down
Chips and splinters must not be removed while the machine is running.
Keep mains lead clear from working range of the machine. Always lead the cable away
behind you.
When working in walls ceiling, or
fl
oor, take care to avoid electric cables and gas or
waterpipes.
Clamp your workpiece with a clamping device. Unclamped workpieces can cause severe
injury and damage.
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for di
ff
erent applications, with di
ff
erent accessories or poorly
maintained, the vibration and noise emission may di
ff
er. This may signi
fi
cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched o
ff
or when it is running but not actually doing the job. This may
signi
fi
cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e
ff
ects of vibration and/or noise such as: maintain the tool and the accessories, keep the hands warm, organization of work
patterns.
