3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another.
Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci
-
dentally occurs, flush with water. If liquid con
-
tacts eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam
-
aged or modified.
Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or tem
-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
• Use tool only as directed. Only trained personnel
should operate tool.
• Do not use tool without jaws installed.
Fingers
could be crushed.
• Keep hands away from jaws while tool is in use.
Fingers could be crushed.
•
To reduce the risk of injury, wear safety goggles
or glasses with side shields.
•
Inspect and discard workpieces with cracks or
wear before use. Materials may crack or shatter.
• Use tool only with MILWAUKEE jaws, and to
press-fit pipes and fittings for which they are
designed.
Other uses may cause injury or damage
to the tool, accessories, and pipes. Leaking may
result.
• Only use MILWAUKEE jaws designed for use on
this tool.
•
Maintain labels and nameplates.
These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
C
US
Underwriters Laboratories, Inc.
United States and Canada
To reduce the risk of injury, wear safety
goggles or glasses with side shields
when operating or servicing the tool.
Read operator's manual.
Align fitting properly. Incorrectly aligned
fittings could result in jaw damage.
SPECIFICATIONS
Cat. No. ..................................................... 2674-20
Volts
..............................................................
18 DC
Battery Charger
............................................
M18™
Charger Type
................................................
M18™
Operating Temp
...................................
23° - 122° F
Compression Range
..............................
< = 1" PEX
FUNCTIONAL DESCRIPTION
1
2
4
5
3
6
7
8
1.
Retaining pin
2.
Jaws
3.
Trigger
4.
Handle
5.
LEDs
6.
Hanger
7.
Full cycle indicator
8. Gauge (Cat. No. 49-11-0080 or 49-11-0081)
ASSEMBLY
WARNING
Recharge only with the charger
specified for the battery. For spe
-
cific charging instructions, read the operator’s
manual supplied with your charger and battery.
Inserting/Removing the Battery
To
remove
the battery, push in the release buttons
and pull the battery pack away from the tool.
To
insert
the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Always remove battery pack before
changing or removing accesso-
ries. Only use accessories specifically recom
-
mended for this tool. Others may be hazardous.
