Milnor COLFM 111, Installation And Service

Page: 16 / 104

Understanding the Tag Guidelines for the Models Listed Below
PELLERIN MILNOR CORPORATION
Most tags contain only symbols (no words). A few are worded. The explanations below, start
with the tag part number (displayed on the tag). If a tag contains no words, the meaning of the tag
is explained below. If the tag contains words, the explanation below simply repeats the wording.
Display or Action Explanation
Read the manual before proceeding. This symbol appears on
most tags. The machine ships with a complete set of manuals.
The safety, installation, and electrical schematic manuals are
particularly important to installers.
B2TAG88005: This carefully built product was tested and
inspected to meet Milnor
®
performance and quality standards by
B2TAG94078: Do not forklift here; do not jack here; do not step
here—whichever applies.
B2TAG94079: Rig for crane lifting (either 3-point or 4-point,
depending on the number of lifting eyes provided) using a steep
angle on the chains (closer to vertical than horizontal).
B2TAG94084: Do not lift from one corner of the machine, as
this can cause the frame to rack, damaging it.
B2TAG94089: Do not attempt to balance the shuttle on the
lower shipping brackets. Always suspend and lift the shuttle
from the lifting eyes at the top of the machine.
B2TAG94118: Do not strike shipping container during fork-
lifting. Fragile components inside.
12