Milnor COLFM 111, Installation And Service

Page: 50 / 104

Shuttle Preventive Maintenance
PELLERIN MILNOR CORPORATION
BIVUUM01 (Published) Book specs- Dates: 20070306 / 20070306 / 20070306 Lang: ENG01 Applic: VSD
Shuttle Preventive Maintenance
1.
General Information
WARNING 1 : Crush Hazards —A traveling machine such as a shuttle can crush or entrap
you if the bed or bucket descends while you are under it. The bed or bucket can descend with
power off or on.
• Secure both red safety pins in accordance with the instructions furnished, then lock out
and tag out power at the main machine disconnect before working under bed or bucket.
Figure 1: Safety Pin/Bar Use and Storage
Shuttle safety pins (inserted) Cobuk Safety Bar
Legend
1. Safety bar installed
2. Safety bar storage position
.
2.
Lubrication Precautions
[Document BIUUUM01]
CAUTION 2 : Machine Damage Hazard —Improper lubrication can damage machine
components and cause the machine to malfunction.
• Do not mix petroleum and synthetic based lubricants.
• Do not use an unspecified lubricant without consulting the lubricant manufacturer.
• Do not apply grease with a pneumatic grease gun. Use only a hand-operated grease gun.
• Do not over-lubricate.
• Always clean grease fittings before adding grease. Clean off excess grease.
• Ensure that lubricants do not drip onto belts, brake shoes or drums.
WARNING 3 : Entangle and Crush Hazards —Contact with moving components normally
isolated by guards, covers, and panels, can entangle and crush your limbs. These components
move automatically.
• Abide by the current OSHA lockout/tagout standard when lockout/tagout is called for in
the service instructions. Outside the USA, abide by the OSHA standard in the absence of
any other overriding standard.
• Do not service the machine unless qualified and authorized. You must clearly understand
46