Milnor 42044SR2, Installation Manual

Page: 14 / 68

Safety—Tilting Washer-Extractors
PELLERIN MILNOR CORPORATION
WARNING 12 : Multiple Hazards
—Operating the machine with an inoperative safety device
can kill or injure personnel, damage or destroy the machine, damage property, and/or void the
warranty.
• Do not tamper with or disable any safety device or operate the machine with a
malfunctioning safety device. Request authorized service.
WARNING 13 : Electrocution and Electrical Burn Hazards —Electric box doors—
Operating the machine with any electric box door unlocked can expose high voltage conductors
inside the box.
• Do not unlock or open electric box doors.
WARNING 14 : Entangle and Crush Hazards —Guards, covers, and panels—Operating
the machine with any guard, cover, or panel removed exposes moving components.
• Do not remove guards, covers, or panels.
WARNING 15 : Crush Hazards —Down limit switches (machines with front and rear tilt
cylinders)—Failure of both front or both rear limit switches allows the seated tilt wheels on a
tilted machine to lift from their cradles. The housing will fall and lunge forward or rearward.
• Do not operate the machine with any evidence of damage or malfunction.
5.1.2.
Hazards Resulting from Damaged Mechanical Devices
WARNING 16 : Multiple Hazards —Operating a damaged machine can kill or injure
personnel, further damage or destroy the machine, damage property, and/or void the warranty.
• Do not operate a damaged or malfunctioning machine. Request authorized service.
WARNING 17 : Explosion Hazards
—Cylinder—A damaged cylinder can rip apart during
extraction, puncturing the shell and discharging metal fragments at high speed.
• Do not operate the machine with any evidence of damage or malfunction.
WARNING 18 : Explosion Hazards —Clutch and speed switch (multiple motor
machines)—A damaged clutch or speed switch can permit the low speed motor to engage during
extract. This will over-speed the motor and pulleys and can cause them to rip apart, discharging
metal fragments at high speed.
• Stop the machine immediately if any of these conditions occur: • abnormal whining sound
during extract • skidding sound as extract ends • clutches remain engaged or re-engage
during extract
5.2.
Careless Use Hazards
5.2.1.
Careless Operation Hazards—Vital Information for Operator Personnel (see also
operator hazards throughout manual)
WARNING 19 : Multiple Hazards —Careless operator actions can kill or injure personnel,
damage or destroy the machine, damage property, and/or void the warranty.
• Do not tamper with or disable any safety device or operate the machine with a
malfunctioning safety device. Request authorized service.
• Do not operate a damaged or malfunctioning machine. Request authorized service.
• Do not attempt unauthorized servicing, repairs, or modification.
10