Miller 907684001, Owner'S Manual

Page: 22 / 92

.
A complete Parts List is available at www.MillerWelds.com
OM-270536 Page 14
4-4. Dynasty Specifications (Continued)
Process
Output Ratings
Current Draw (A)
At Rated Input Voltage (V)
Input Power
Current
(A)
Voltage (V)
Duty
Cycle
Phase 120V kW kVA
STICK
100 24 40% 1 31
− − −
3.7 3.7
90 23.6 60% 1 28
− − −
3.3 3.3
75 23 100% 1 23
− − −
2.7 2.7
TIG
150 16 40% 1 33
− − −
3.9 3.9
125 15 60% 1 26
− − −
3.1 3.2
100 14 100% 1 21
− − −
2.4 2.5
Power Draw (W)
Idle OCV 0 77.5
−
1 85
− − − − −
Idle w/ Output
Off
−
− −
1 24
− − − − −
Standby
−
− −
1 8
− − − − −
B. Maxstar
.
Do not use information in unit specifications table to determine electrical service requirements. See Sections 5-7, 5-8 and 5-9 for information on
connecting input power.
Welding Amperage
Range
Max Open Circuit
Voltage (Uo)
Low Open-Circuit
Voltage (Uo)
Rated Peak Striking
Voltage (Up)
IP Rating
1-210* 80 8-15*** 15KV** 23
*Welding range for Stick process is 5-210 amperes. For TIG, the amperage range is tungsten diameter dependent (see Sections 8-4 and/or
10-3) depending on model.
** Arc starting device is designed for manual guided operations.
*** Low open-circuit voltage while in TIG Lift Arc
t , or while in Stick with low open-circuit voltage selected.
Process
Output Ratings
Current Draw (A)
At Rated Input Voltage (V)
Input Power
Current
(A)
Voltage (V)
Duty
Cycle
Phase 208V 240V 400V 480V kW kVA
STICK
210 28.4 30%
1 36 30 18 15 7.3 7.4
3 21 18 10 9 7.1 7.4
160 26.4 60%
1 26 22 13 11 5.3 5.3
3 15 13 8 6 5.2 5.5
125 25 100%
1 19 16 10 8 3.9 4.0
3 11 10 6 5 3.9 4.1
TIG
210 18.4 60%
1 24 20 12 10 4.9 4.9
3 14 12 7 6 4.9 5.2
175 17 100%
1 19 17 10 8 4.0 4.0
3 12 10 6 5 4.0 4.2