.
A complete Parts List is available at www.MillerWelds.com
OM-270536 Page 17
4-6. Static Characteristics
The static (output) characteristics of the welding power source can be described as
drooping
during the SMAW and GTAW processes. Static
characteristics are also affected by control settings (including software), electrode, shielding gas, weldment material, and other factors. Contact
the factory for specific information on the static characteristics of the welding power source.
4-7. Environmental Specifications
A. IP Rating
IP Rating
IP23
This equipment is designed for outdoor use.
IP23 2017
−
02
B. Temperature Specifications
Operating Temperature Range*
Storage/Transportation Temperature Range
14 to 104
°
F (
−
10 to 40
°
C)
*Output is derated at temperatures above 104
°
F (40
°
C).
−
4 to 131
°
F (
−
20 to 55
°
C)
Temp_2016- 07
C. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low
−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000
−
3
−
12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
max
at the point of common coupling is less than 52 m
W
(or the short
−
circuit power S
sc
is greater than 3.1 MVA).
It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that
the system impedance complies with the impedance restrictions.
ce-emc 1 2014-07
D. China EEP Hazardous Substance Information
质
量
China EEP Hazardous Substance Information
部
Component Name
(
适
)
(if applicable)
质
Hazardous Substance
铅
Pb
Hg
镉
Cd
铬
Cr6
苯
PBB
苯醚
PBDE
黄铜
铜部
Brass and Copper Parts
X
O
O
O
O
O
装
Coupling Devices
X
O
O
O
O
O
!
装
Switching Devices
O
O
X
O
O
O
"#"#
配
Cable and Cable
Accessories
X
O
O
O
O
O
$
Batteries
X
O
O
O
O
O
%
表
&'*SJ/T 11364
规
,-..
This table is prepared in accordance with China SJ/T 11364.
O:
表
2
该
质
5
该部
7 8
质
9:
量
85GB/T26572
规
,
限量要
>?@.
Indicates that the concentration of the Hazardous Substance in all homogeneous materials of the part is below the relevant threshold of China
GB/T 26572.
X:
表
2
该
质
AC5
该部
DE8
质
9:
量超
FGB/T26572
规
,
限量要
>.
Indicates that the concentration of the Hazardous Substance in at least one homogeneous
material of the part is above the relevant threshold of
China GB/T 26572.
HIKL
限
'*SJ/Z11388
规
,N,.
The EFUP value of this EEP is defined in accordance with China SJ/Z 11388.
EEP_2016
−
06
Summary of Contents for 907684001
