Miller 907684001, Owner'S Manual

Page: 8 / 92

EMF DATA SHEET FOR ARC WELDING POWER SOURCE
Product/Apparatus Identification
Product Stock Number
MAXSTAR 210 DX (AUTO-LINE 120-480 V) (CE) 907684001
Compliance Information Summary
Applicable regulation Directive 2014/35/EU
Reference limits Directive 2013/35/EU, Recommendation 1999/519/EC
Applicable standards IEC 62822-1:2016, IEC 62822-2:2016
Intended use
☒
for occupational use
☐
for use by laymen
Non-thermal effects need to be considered for workplace assessment
☒
YES
☐
NO
Thermal effects need to be considered for workplace assessment
☐
YES
☒
NO
☒
Data is based on maximum power source capability (valid unless firmware/hardware is changed)
☐
Data is based on worst case setting/program (only valid until setting options/welding programs are changed)
☐
Data is based on multiple settings/programs (only valid until setting options/welding programs are changed)
Occupational exposure is below the Exposure Limit Values (ELVs)
☒
YES
☐
NO
for health effects at the standardized configurations (if NO, specific required minimum distances apply)
Occupational exposure is below the Exposure Limit Values (ELVs)
☐
n.a
☒
YES
☐
NO
for sensory effects at the standardized configurations (if applicable and NO, specific measures are needed)
Occupational exposure is below the Action Levels (ALs) at the
☐
n.a
☒
YES
☐
NO
standardized configurations (if applicable and NO, specific signage is needed)
EMF Data for Non-thermal Effects
Exposure Indices (EIs) and distances to welding circuit (for each operation mode, as applicable)
Head
Trunk
Limb (hand) Limb (thigh)
Sensory Ef­
fects
Health Ef­
fects
Standardized distance 10 cm 10 cm 10 cm 3 cm 3 cm
ELV EI @ standardized distance 0.09 0.08 0.13 0.08 0.17
Required minimum distance 1 cm 1 cm 1 cm 1 cm 1 cm
Distance where all occupational ELV Exposure Indices fall below 0.20 (20%) 5 cm
Distance where all general public ELV Exposure Indices fall below 1.00 (100%) 88 cm
Tested by: Tony Samimi Date tested: 2016-02-17
275606-A