Milestone MacroPATH Basic QX Series Operator'S Manual Download Page 14

Page: 14 / 128

MacroPATH and MacroPATH Basic QX Series

MM161-001

– Operator Manual

For PC installation, carefully remove the film from the touch-screen to prevent damaging it.

It is advisable to turn the PC off completely at least once a week.

2.3. Camera Overview

A)  Lens
B)  LED light
C)  Green power supply LED

A-B-C-D) Adjustments
E) Photographic fitting
F) LED lighting on/off
G) Power supply inlet
H) USB data cable

For the camera installation/clamping supports, refer to chapter 6.

Before turning MacroPATH on (when coming from a storage room), the unit must be
allowed to reach the environmental conditions (at least half an hour).

Summary of Contents for MacroPATH Basic QX Series

































































































































Search results

Summary of Contents for MacroPATH Basic QX Series

Reviews:

Related manuals for MacroPATH Basic QX Series

Brands by name

Popular brands

Milestone MacroPATH Basic QX Series, Operator'S Manual

Search results

Summary of Contents for MacroPATH Basic QX Series

Reviews:

Related manuals for MacroPATH Basic QX Series

Brands by name

Popular brands