Milestone MacroPATH Basic QX Series Operator'S Manual Download Page 104

Page: 104 / 128

MacroPATH and MacroPATH Basic QX Series

MM161-001

– Operator Manual

104

•

Wait at least 5 seconds and then reconnect the camera connector.

•

Wait a few seconds and restart the PC.

•

Wait at least 30 seconds and then relaunch the software.

If the problem is not fixed, contact our Technical support department at
[email protected].

7.3. The Live function is not working

When MacroPATH is launched, if Live is not working, act as follows:

•

Make sure the license is in Settings

– Licensing. If there is none, follow the procedure to create it, as

explained in chapter 3.6.3.

•

If there is a license, follow the instructions provided in the previous chapter.

Summary of Contents for MacroPATH Basic QX Series

































































































































Search results

Summary of Contents for MacroPATH Basic QX Series

Reviews:

Related manuals for MacroPATH Basic QX Series

Brands by name

Popular brands

Milestone MacroPATH Basic QX Series, Operator'S Manual

Search results

Summary of Contents for MacroPATH Basic QX Series

Reviews:

Related manuals for MacroPATH Basic QX Series

Brands by name

Popular brands