Milestone MacroPATH Basic QX Series Operator'S Manual Download Page 39

Page: 39 / 128

MacroPATH and MacroPATH Basic QX Series

MM161-001

– Operator Manual

To enable TWAIN function, refer to chapter 3.6.7.

Make sure that the microphone switch is ON before using it. See the image below.
The microphone image provided is only an example.

Record a video by pressing the

Rec Video

icon. Press again to stop recording.

Before taking a video for the first time, you are asked to choose the most adequate compression.
Milestone suggests to use “Microsoft video 1” compression.
Go to SETTINGS to change compression (see chapter 3.6.11)

Press the

Rec Audio

button to make a recording. Press again to stop recording.

3.4.7. Thumbnails

Saved images, videos and audios appear on the right of the screen (thumbnails).

Summary of Contents for MacroPATH Basic QX Series

































































































































Search results

Summary of Contents for MacroPATH Basic QX Series

Reviews:

Related manuals for MacroPATH Basic QX Series

Brands by name

Popular brands

Milestone MacroPATH Basic QX Series, Operator'S Manual

Search results

Summary of Contents for MacroPATH Basic QX Series

Reviews:

Related manuals for MacroPATH Basic QX Series

Brands by name

Popular brands