Milestone MacroPATH Basic QX Series, Operator'S Manual

Page: 113 / 128

MacroPATH and MacroPATH Basic QX Series MM161-001
– Operator Manual
113
7.7. Return for repair to Manufacturer
This instrument is an in-vitro medical diagnostic device and it is usually installed in a laboratory where
samples and other biological tissues are present. For your safety, it must therefore be cleaned and
disinfected before use, and gloves must be worn when using this instrument.
You must wear gloves when operating the system.
If the unit needs to be returned to Milestone s.r.l. for repairs, the device must be cleaned up and disinfected
(as described in chapter 5) prior to shipment. Any units that have not been disinfected will not be accepted
and you will be contacted with regards to disinfection cost.
In accordance with international health standards, biohazard materials must be shipped in appropriate
packages (risk of fines).
7.8. PC Recovery Software
This procedure deletes all of the data and settings in the PC. The PC will go back to
the factory configuration.
This procedure will reinstall the operating system.
This procedure needs to be carried out by duly trained staff (IT Manager).
This procedure uses Clonezilla Software.
Clonezilla itself is licensed under the GNU General Public License (GPL) Version 2.
Clonezilla comes with absolutely NO Warranty.
For all the other languages, refer to the Clonezilla procedure in English.
Insert the
USB key with the “Clonezilla”
software (WHITE USB port) and the key
with the images Installed (BLUE 3.0 USB
port)
Press the PC ‘on’ key
Press “Esc” or “Del” repeatedly at startup
until the blue screen appears.
Read the following notes carefully