Milestone MacroPATH Basic QX Series Operator'S Manual Download Page 103

Page: 103 / 128

MacroPATH and MacroPATH Basic QX Series

MM161-001

– Operator Manual

103

7.1.2. How to start the remote connection.

Double click on the Milestone Remote Connection button on the Desktop to launch
communication. The following panel will appear.

Contact customer support at this e-mail address:[email protected] and provide the
following data:

•

Serial number of the unit

•

Version of the remote connection software

•

Password

The connection can only be established if the GREEN icon appears.

7.2. The camera is not working

If the camera is not working correctly, follow the procedure explained below:

•

Exit the software

•

Switch off the PC.

•

Wait a few seconds and restart the PC.

•

Wait at least 30 seconds and then relaunch the software.

If the camera continues not working:

•

Exit the software

•

Switch off the PC.

•

Then disconnect the camera’s power supply, disconnecting the camera’s connector as pictured below.

The password changes every time the PC is restarted or switched off.

Summary of Contents for MacroPATH Basic QX Series

































































































































Search results

Summary of Contents for MacroPATH Basic QX Series

Reviews:

Related manuals for MacroPATH Basic QX Series

Brands by name

Popular brands

Milestone MacroPATH Basic QX Series, Operator'S Manual

Search results

Summary of Contents for MacroPATH Basic QX Series

Reviews:

Related manuals for MacroPATH Basic QX Series

Brands by name

Popular brands