Miele WCE 670 Operating Instructions Manual Download

Page: 77 / 100

Installation and connection

Levelling the machine

The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.

Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.



Using the spanner supplied, turn
counter nut

in a clockwise direction.

Then turn counter nut

together with

foot

to unscrew.



Use a spirit level to check that the
washing machine is standing level.



Hold foot

securely with a pipe

wrench. Turn counter nut

anti-

clockwise using the spanner supplied
until it sits firmly up against the
housing.



All four counter nuts must be

firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is a danger of the machine
moving about.

Summary of Contents for WCE 670





































































































Search results

Summary of Contents for WCE 670

Reviews:

Related manuals for WCE 670

Brands by name

Popular brands

Miele WCE 670, Operating Instructions Manual

Search results

Summary of Contents for WCE 670

Reviews:

Related manuals for WCE 670

Brands by name

Popular brands