Miele WCE 670 Operating Instructions Manual Download

Page: 50 / 100

Changing the programme sequence

Cancelling a programme

You can cancel a programme at any
time after it has started.



Touch the

Start/Stop

sensor.

The following will appear in the display:

Cancel programme











Touch the

sensor.

The suds will be pumped away. The
following will appear in the display:

Prog. cancelled











Wait until the door unlocks.



Pull open the door.



Remove the laundry.

Interrupting a programme



Turn the programme selector to the



position.

The washing machine switches off.



To continue: Turn the programme
selector to the position of the wash
programme that was started.

Useful tip:



Cannot be changed

appears in the display, the programme
selector is in the incorrect position.

Changing a programme

After the successful start of a
programme it is no longer possible to
select a different programme.

Summary of Contents for WCE 670





































































































Search results

Summary of Contents for WCE 670

Reviews:

Related manuals for WCE 670

Brands by name

Popular brands

Miele WCE 670, Operating Instructions Manual

Search results

Summary of Contents for WCE 670

Reviews:

Related manuals for WCE 670

Brands by name

Popular brands