Before using for the first time
20
3. Removing the transit bars
Failure to remove the transit bars
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation and connection”.
The following message appears in the
display:
Remove transit bars
Confirm with the
OK
sensor.
4. Commissioning TwinDos
The UltraPhase 1 and UltraPhase 2
values are pre-set in the standard
settings and only need to be confirmed.
The following message appears in the
display:
TwinDos
Confirm with
OK
.
The following message appears in the
display:
Set now
To set up TwinDos now, touch the
OK
sensor.
To postpone setup until later: Touch
the
sensor until the following
appears in the display:
Set later
and
press
OK
to confirm.
Settings for compartment
The UltraPhase 1 values are pre-set in
the standard settings.
Agent for
OK
Confirm with the
OK
sensor.
Miele UltraPhase 1
OK
Confirm with the
OK
sensor.
The following will appear in the display:
Set the dosage. Observe water hardness
level
Confirm with the
OK
sensor.
The dispensing quantity for
UltraPhase 1 for
(hardness range I)
is pre-set.
Per load
OK
ml
48
Confirm the pre-set value with the
OK
sensor or correct the value with the
sensors and confirm this with the
OK
sensor.
UltraPhase 1
Hardness level I
48 ml
Hardness level II
60 ml
Hardness level III
72 ml
