Miele WCE 670 Operating Instructions Manual Download

Page: 29 / 100

4. Selecting programme settings

Selecting a temperature/spin
speed

You can alter the preset temperature/
spin speed of a wash programme, if
this option is permitted for that
programme.

2:59









 1400



Touch the



sensors above or

below the temperature or spin speed
value in the display until the
temperature/spin speed you want
appears in the display.

Selecting Extras



Touch the sensor for the Extra you
want. It then lights up brightly.

Useful tip:

You can select multiple

Extras for a wash programme.

Not all the Extras can be used with
every programme. If an Extra is not
dimly lit, this option is not permitted
for the wash programme (see
“Extras”).

Extras sensor control

You can select additional Extras using
the Extras sensor.



Touch the Extras sensor.

The following appears in the display:

No Extras















Touch the



sensors until the Extra

you want appears in the display.



Confirm the Extra with



Level of soiling

The



sensor is only active with the

TwinDos option activated. See
“5. Adding detergent - TwinDos” for
more information.

Summary of Contents for WCE 670





































































































Search results

Summary of Contents for WCE 670

Reviews:

Related manuals for WCE 670

Brands by name

Popular brands

Miele WCE 670, Operating Instructions Manual

Search results

Summary of Contents for WCE 670

Reviews:

Related manuals for WCE 670

Brands by name

Popular brands