6. Starting the programme - the end of the programme
38
Starting a programme
Touch the flashing
Start/Stop
sensor.
The door will lock (
will appear in the
display to show this) and the
programme will start.
If a Delay start time has been selected,
it will count down in the time display. At
the end of the Delay start time or
immediately after the programme has
started (if no Delay start time has been
selected), the programme duration will
appear in the time display.
Energy savings
After 10 minutes the indicators will dim.
The
Start/Stop
sensor flashes slowly.
You can reactivate the indicators:
To do this, touch the
Start/Stop
sensor (this does not have any effect
on a running programme).
At the end of the programme
The door is still locked during the Anti-
crease phase and the following will
appear alternately in the display:
Finish/Anti-crease
OK
and
Press Start/Stop
OK
Touch the
Start/Stop
sensor. The
door will be unlocked.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Check that all items have been
removed from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Turn the programme selector to the
position. This switches the
washing machine off.
If applicable, remove the used
capsule from the detergent dispenser
drawer.
Useful tip:
Leave the detergent
dispenser drawer slightly open to allow
it to dry. Close the door of the washing
machine.
