Miele WCE 670 Operating Instructions Manual Download

Page: 86 / 100

Settings

You can use the settings to alter the
machine's electronics to suit changing
requirements.

Settings can be altered at any time.

Calling up settings



Turn the programme selector to

Further programmes



Sportswear











Touch the



sensor controls until

the following appears in the display:

Settings 











Confirm with the

sensor.

Language 









You are now in the

Settings

submenu.

Selecting settings



Touch the



sensors until the

setting you want appears in the
display.

– The



sensor scrolls down the list.

– The



sensor scrolls up the list.



Touch the

sensor to select the

setting displayed.

Changing a setting



Touching the





sensors will call up

the different options for the setting.

The option that is selected will have a
tick



next to it.



When the option you want appears in
the display, touch the

sensor to

activate it.

Closing the settings menu



Turn the programme selector.

Summary of Contents for WCE 670





































































































Search results

Summary of Contents for WCE 670

Reviews:

Related manuals for WCE 670

Brands by name

Popular brands

Miele WCE 670, Operating Instructions Manual

Search results

Summary of Contents for WCE 670

Reviews:

Related manuals for WCE 670

Brands by name

Popular brands